Description
Partie amplificateur de puissance :
- Output power
-
- 50W+50W (8 ohms, 2 sortie fonctionnant simultanément )
- 60W/60W (8 ohms, par canal)
-
- THD : < 0.03% (8Ω, 50W)
- Cross modulation distortion : < 0.04% (8Ω, 50W, 70Hz:7kHz=4:1)
- Output bandwidth : 5Hz – -50kHz three dB (0.1%)
- Input sensitivity/impedance : 580mV/50kohm
- Remains noise : 0.5mV or less
- Dumping factor : 40 (8Ω, 20Hz – 20kHz)
Attachment
- Attenuator (-18dB)
- Main speaker switchpoint
- Remote speaker switchpoint
- Headset jack
Preamplifier part
- Standard output voltage :
-
- Pre out:580mV
- Rec out:100mV
-
- Maximum output voltage Pre out:5V
- Output load impedance
-
- Pre out : About 100ohms
- Rec out: About 100ohms
-
- Frequency characteristic : 10Hz – -50kHz one dB (Aux1)
- THD : 0.04% or less (Aux1, 1kHz, 1V)
- Input sensitivity
-
- Phono1, 2:2.4 mV
- Tuner: 100mV (with an input level set)
- Aux1, 2:100mV
- Mic:2.4mV
-
- Input impedance
-
- Phono1:50kohm, 65kohm, 90kohm, a switching
- Phono2:65kohm
- Tuner: 50kohm
- Aux1, 2:50kohm
- Mic: 50kohm
-
- S/N ratio
- Phono1, 2:65dB or more
- Mic: 60dB or more
- Tuner, Aux1, 2:80dB or more
- Maximum permissible input Phono: 300mV (1kHz, R-M-S)
- Tone control With a curving [ LUX scheme NF type ] point switching
-
- The point curving [ low-pass ]: 150Hz, 300Hz, 600Hz
- The point curving [ high region ]: 1.5kHz, 3kHz, 6kHz
-
- Filter
-
- A low cut: 30Hz, 6dB / oct
- A high cut: 8kHz, 6dB / oct
-
- A low boost 70Hz
Attachment
- Tapes monitor switchpoint (two lines)
- Dumping switchpoint
- Input-impedance switching
- Input level set
- Power consumption : 200W (at the time of an 8Ω simultaneous load intensity and the maximum output)
- Dimensions : 450x160x268mm
- Weight : 11 kg
